Options - Scanning (SC)

By clicking within the Options-menu on the subsection Scanning you may define the parameters for the scanner like the scan-mode, whether a document should be scanned in B/W, grayscale or color and many things more.

Please note: Whether an option is available to you depends on the scanner you’re using as well as the capabilities supported by the TWAIN-driver.

In case you’re using a hardware scanner the options you may choose from might look similar to the ones within the screenshot.

Scanning options provided by a hardware scanner

Depending on the hardware scanner you’re using, you may choose and set the following options:

Option name

Type

Description

Possible values

Scan-Mode

List

Defines whether documents are being scanned in simplex or duplex mode.

Simplex: Front side is being scanned

Duplex: Both sides of the documents are being scanned

Simplex

Duplex

Color Mode

List

Defines whether documents are being scanned in B/W, Grayscale or Color.

Black & White

Grayscale

Color (RGB)

Resolution

List

Defines the pixel density in DPI of the scanned documents.

Depends on your scanner

Orientation

List

Defines the orientation of the scanned documents.

Portrait

Landscape

Brightness

Slider

May be used in order to increase or reduce the brightness factor of the scan result.

Please note: Depending on the hardware and the driver used, you may have access to the Auto-checkbox on the right-hand side.

Default: 0

All integer values between:

-100 → 100

Contrast

Slider

May be used in order to increase or reduce the contrast factor of the scan result.

Please note: Depending on the hardware and the driver used, you may have access to the Auto-checkbox on the right-hand side.

Default: 0

All integer values between:

-100 → 100

Format

List

You may choose from the available formats which suits best your needs.

Depends on your scanner

Feeder

List

May be used in order to specify the feeder.

Depends on your scanner

Scanner Options

Barcodes

Checkbox

In case your scanner/driver supports hardware barcode detection you may tick this box.

If ticked the scanner will communicate detected barcodes to KGS Scan.

Ticked / Unticked

Auto Deskew

Checkbox

When your scanner/driver is capable to detect whether scanned documents are skewed you may tick this box in order to rectify the scanned pages.

Ticked / Unticked

Auto Blank Page Removal

Checkbox

If your scanned documents contain blank pages and your scanner/driver is capable to detect those, you may tick this box in order to remove blank pages altogether.

Ticked / Unticked

Auto Rotation

Checkbox

In case you’re scanning pages and want to make sure, that none are sideways or upside down, you may tick this box in order to activate the auto rotation capabilities of your scanner (if those are existing and the driver is capable to do that).

Ticked / Unticked

use TwainUI

Checkbox

When being enabled this will launch the TwainUI-dialogue for each scan process.

KGS Scan will apply the results of this user interaction accordingly. This gives you the option to modify local scanner parameters each time before scanning starts.

Ticked / Unticked

Auto Color

Checkbox

If your driver/scanner is capable to automatically detect whether a document needs to be scanned in color mode, grayscale or B/W you may tick this box, if it’s being provided by your scanner.

Ticked / Unticked

Â