...
Inside this tab SAP connections can be defined.
...
BCSAPASHost
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
In case you’re using an SAP Application Server as host, you may put it’s IP adress or hostname name into this field.
This hostname will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPGWHost
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
In case you’re using an SAP Gateway you may enter the gateway’s IP adress or hostname into this field.
This gateway hostname will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPGWServ
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
This field should contain the service number of the SAP gateway.
This service number will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPMSHost
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
If you’re using an SAP Message Server instead, you may enter the message server IP adress or hostname here.
This hostname will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPSystem
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
In order to use a load balanced RFC configuration this parameter has to contain the SAP systems name.
In load balanced scenarios this parameter requires the following parameters to be defined as well.
BCSAPMSHost
BCSAPGroup
This SAP system name will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPGroup
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
Here you may enter the name of the group of SAP application servers.
This SAP application server group will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPClient
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
Client needef for RFC communication with the SAP application server.
...
BCSAPUser
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
User name needed for the RFC communication with SAP application server.
...
BCSAPPassword
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
Password related to the user, which is being used for the RFC communication with SAP application server.
...
BCSAPLanguage
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
You may enter the language used for RFC ommunication with SAP application server in her.
E.g.: EN
This language will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPHost
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
The SAP Server’s IP address for RFC communication has to be entered here.
| Note |
|---|
Please note: Only valid IP adresses are allowed for this parameter, names are not being supportet. |
This IP adress will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note also: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPSysNr
...
String
...
| Info |
|---|
Please note: As of version 3.1.37, these parameters are deprecated. DocumentRouter will still support the former way of providing the SAP-connection per instance in case you're using old configuration files for setting up DocumentRouter instances. When creating new instances you may choose from the list of SAP connections created in the SAP Connector. |
Within this field you may enter the SAP system number for RFC communication with the SAP application server.
This system number will serve as fallback for all content repository ID’s in case no explicit definition was provided for the content repository.
Please note: It’s good practice to always provide an explicit definition for the content repositories.
...
BCSAPArchivDir
...
String
...
In case the BCSAPALProt-parameter is set to 3.1 you may define her the DMS archive directory from the perspective of the KGS DocumentRouter machine. It’s the same directory where the DMS expects document files when SAP sends an archiving request.
| Note |
|---|
Please note: It’s important the KGS DocumentRouter has to has read/write permissions to that directory. |
...
BCSAPALProt
...
String
...
this field defines which ArchiveLink protocol version will be used by KGS DocumentRouter for document archiving.
The following entries are supported.
3.1 → ArchiveLink protocol version 3.1
4.5 → ArchiveLink protocol version 4.5
Direct → Setting this parameter to Direct means that the archiving takes places through the archiving vendor’s proprietary interface.
In order to use the archiving system’s native interface it’s necessary to define the parameters Archive*-parameters (e.g.: ArchiveVendor,ArchivePassword,ArchiveHost, etc).0 → Setting this parameter to 0 means, that the archiving process is being skipped.
...
BCSAPIndexExportDir
...
String
...
If this parameter has been specified KGS DocumentRouter will use this path in order to generate index output files for every index input file. These output files contain the input index, added by the archived document ID which has been created when archiving the image file. The syntax for the filename is like this.
<Content Repository>_<Document ID>.idx
In order to enable the generation of index export files this parameter has to be supplied with a valid path.
| Note |
|---|
Please note: It’s important the KGS DocumentRouter has to has read/write permissions to that directory. |
Parameter name | Type | Description |
|---|---|---|
SAPLinkRemoteFunction | String | Within this field you may define the user function used for linking the documents to SAP Business Objects. By default the following user function will be used: ARCHIV_CONNECTION_INSERT (e.g.: ZKGS_ARCHIV_CONNECTION_INSERT) |
SAPCommit | Boolean | This parameter may be used togehter with your own user remote function in order to execute explicitily a commit on the SAP database after inserting a link entry into the SAP ArchiveLink table. 0 = No explicit commit will be done 1 = An explicit commit will be done |
SAPConnection |
...
List
...
You may choose from the list all SAP connections defined within the KGS SAP Connector.
In case your scenario doesn’t require any SAP connection please choose the none from the list.
DropDown | Choose a SAP connection defined within the KGS SAP Connector. If no connection is required, please choose none. | |
PerformKeySetBeforeArchiving | Boolean | TODO |
BCSAPLinkObject | String | The parameter BCSAPLinkObject defines whether a document should be |
...
linked to an SAP business object |
...
after archiving. This parameter serves as fallback in case no explicit definition was found. |
...
It’s good practice to always provide an explicit definition for the content repositories. In case multiple file types are being processed the definition of a single file name extension determines which document types are being linked to SAP (e.g.: pdf|txt → All documents with the file extensions .pdf or .txt will be linked to SAP)
|
...
|
You may enter the following values.
available settings:
|
...
|
...
BCSAPIndexExportKeys
...
String
...
The parameter BCSAPIndexExportKeys defines which key values provided by the index file have to be used for generating index export files. Index values within the index file have to match with the following syntax.
indexname=value
In case multiple values arebeing exported they have to be separated by a vertical bar ( | ) symbol.
E.g.:
indexname1|indexname2|indexname3
Barcode|Index230
|
...
3 = KGS DocumentRouter will create an SAP Workitem.
...
file extensions = You may also provide a list of file extensions separated by a vertical bar |
| ||
BCSAPSkipArchiving | Boolean | You may control with the parameter BCSAPSkipArchiving whether archiving shall be done or whether the archiving process hall be skipped, but the SAP linking shall be done only. This is especially useful for historical documents that have been archived already and only need to be linked to SAP. The following values are supported.
|
RecheckingType | List | You may define the level of checks done for the linking process to SAP. You may choose from the following list provided by KGS DocumentRouter.
|
SAPLinkingFileFilter | String | TODO |