Page Comparison

Defines the path, where documents will be stored.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: ArchPath_T1 = /opt/storage/T1

Multiple path configurations are possible by adding a "#<number>" between ArchPath and potential trailing repository specification.

Example: 

ArchPath#1_T1 = /opt/storage1/T1

ArchPath#2_T1 = /opt/storage2/T1

0 = No data encoding

1 = KGS encoding

This parameter can be set per ContentRepository.

Example:

DataEncoding = 0

DataEncoding_T1 = 1

Defines the path for storing dulicates of the data (mirroring).

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: DuplicatePath_T1 = /opt/storage/T1

Multiple path configurations are possible by adding a "#<number>" between DuplicatePath and potential trailing repository specification.

Example: 

DuplicatePath#1_T1 = /opt/storage1/T1

DuplicatePath#2_T1 = /opt/storage2/T1

Move files instead of copying to ArchPath.

If this option is being enabled it increases the performance if the working directory of the ContentServer and the defined ArchPath are on the same hard disk.

Defines the minimal amount of space in megabyte that should be kept free.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: FreeDiscSpaceArchPath_T1 = 1024

Multiple space configurations are possible by adding a "#<number>" between FreeDiscSpaceArchPath and potential trailing repository specifications.

Example: 

FreeDiscSpaceArchPath#1_T1 = 1024

FreeDiscSpaceArchPath#2_T1 = 512

Defines the minimal amount of space in megabyte that should be kept free.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: FreeDiscSpaceDuplicatePath_T1 = 1024

Multiple space configurations are possible by adding a "#<number>" between FreeDiscSpaceArchPath and potential trailing repository specifications.

Example: 

FreeDiscSpaceDuplicatePath#1_T1 = 1024

FreeDiscSpaceDuplicatePath#2_T1 = 512

Defines the hashing algorithm used for the hashkey.

Empty means that the hashmode is off.

This parameter can be set per ContentRepository.

Example: HashAlg_T1 = MD5

Enables or disables the hashkey check during document checkout (get).

This parameter can be set per ContentRepository.

Example:

HashCheck = false

HashCheck_T1 = true

Defines a limitation for the maximal length of the filename.

When this limit is exceeded the part of the ComponentID in the filename is being replaced by a fingerprint of the ComponentID and the original ComponentID is being stored in the info-file.

Use this parameter only if your file system has a limitation that does not fit to the documents you want to archive.

0 = no limitation

List of ContentRepository name/-s, separated by comma

Defines a list of one or many ContentRepositories which shall be handled as read only.

For every repository specified here, all write-requests will be rejected.

Defines the amount of time (in months) from the creation date until the document should be protected from deletion. (Must be used together with EnableCheckRetentionDate = TRUE)

Retention periods can be set per ContRep and per document mimetype.

Example: RetentionPeriod_T1=36|application /x-alf=1000|application/x- reo=5|image/tiff=6