Page Comparison

List of comma-separated ContentReposity/-ies that should be handled as read only.

If set to true, all write requests will be rejected.

Move files instead of copying to ArchPath.

If this option is being enabled it increases the performance if the working directory of the ContentServer and the defined ArchPath are on the same hard disk.

Default: false

Repository ID in document filing structure on/off

Recommendation: TRUE

Default: TRUE

Defines the path, where documents will be stored.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: ArchPath_H8 = /opt/storage

Multiple path configurations are possible by adding a "#<number>" between ArchPath and potential trailing repository specification.

Example:  ArchPath#1_T1 = /opt/storage

                ArchPath#2_T1 = /home/temp/storage_T1

Defines the minimal amount of space in megabyte that should be kept free.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: FreeDiscSpaceArchPath_H8 = 1024

Multiple space configurations are possible by adding a "#<number>" between FreeDiscSpaceArchPath and potential trailing repository specifications.

Example:  FreeDiscSpaceArchPath#1_T1 = 1024

                FreeDiscSpaceArchPath#2_T2 = 512

If set to true, component file and corresponding info file will be set read only on the filer. A delete date will be calculated and added to the properties file of the component. (Locking is done by a combination of the OS commands “touch –a –t” and “chmod 440”)

Default: FALSE

If set to true, component file and corresponding info file will be set read only on the filer. A delete date will be calculated and added to the properties file of the component. (Locking is done by a combination of the OS commands “touch –a –t” and “chmod 440”)

Repository ID’s to change, comma- separated. This parameter works

only in combination with

ContRepInPath = false. If a docu-ment is archived with one of these ID’s, the first access to this docu-ment with a different Conten-tRepID will overwrite the reposi-tory information in the document info file.

Defines the path for storing dulicates of the data (mirroring).

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: DuplicatePath_H8 = /opt/storage

Multiple path configurations are possible by adding a "#<number>" between DuplicatePath and potential trailing repository specification.

Example:  DuplicatePath#1_T1 = /opt/storage

                DuplicatePath#2_T1 = /home/temp/storage_T1

Defines the minimal amount of space in megabyte that should be kept free.

Can be specified per ContentRepository by adding a trailing "_<ContentRepository>"

Example: FreeDiscSpaceDuplicatePath_H8 = 1024

Multiple space configurations are possible by adding a "#<number>" between FreeDiscSpaceArchPath and potential trailing repository specifications.

Example:  FreeDiscSpaceDuplicatePath#1_T1 = 1024

                FreeDiscSpaceDuplicatePath#2_T2 = 512

0 = No data encoding

1 = KGS encoding

This parameter can be set per ContentRepository.

Example:

DataEncoding = 0

DataEncoding_T1 = 1

Defines a limitation for the maximal length of the filename.

When this limit is exceeded the part of the ComponentID in the filenmae is being replaced by a fingerprint of the ComponentID and the original ComponentID is being stored in the info-file.

Use this parameter only if your file system has a limitation that does not fit to the documents you want to archive.

Default: 0 = no limitation